HT ICOM V82/U82

images/alat-komunikasi/Icom V82_U82_1.jpg

7W powerful output power

A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time

High Power! Digital Capability! Power to Go Anywhere!

Optional digital unit, UT-118
The optional UT-118 provides D-STAR format digital voice and slow data communiation. The UT-118 includes the following digital features.

Callsign calling
In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory.

Position exchange with external GPS receiver
When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible.
* NMEA 0183 output and RS-232C interface are required.
** Position mapping software required (Not supplied by Icom ).

And more digital features
20-character short data message

Digital code squelch
EMR communication
Digital pocket beep
Stand-by beep
7W powerful output power
A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time.
* 5W for UHF.

200 memory channels and 10 memory banks
Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom�s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting blank links.

Built-in CTCSS/DTCS
Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency.

Other features
NOAA weather channel receive*
*USA version only
Automatic repeater function*
*IC-82 USA version only
Reversible control knob and up/down buttons assignment
Durable construction and simple operation
16 DTMF dial memory
PC cloning capability

General

Frequency Coverage

(unit: MHz)

Version

IC-V82

IC-U82

USA

Tx 144-148

Rx 136-174^*1

Tx 420-450^*2

Rx 400-479^*2

Europe

144�146

430�440

Guaranteed Range ^*1 144-148MHz, ^*2 440-450MHz

Mode

F3E, F2D, F7W*
*Optional UT-118 Required

Number of memory Ch.

207 (incl. 6 scan edges and 1 call)

Operating Temp. Range

-10�C to +60�C; +14�F to +140�F

Frequency stability

�2.5 ppm (-10�C to 60�C)

Power supply requirement

7.2V DC

(6.0-10.3V DC aceptable; Icom's battery pack only)

Current drain

(at 7.2V DC)

IC-V82

IC-U82

High (7W/5W)

2.6A

2.0A

Max. audio Standby
Power Save

250mA

80mA

30mA

250mA

80mA

30mA

Antenna impedance

50Ω (BNC)

Dimensions (W�H�D) (Projections not included)

54 � 139 � 37.5 mm;

2¹/₈ � 5¹⁵/₃₂ � 1⁷/₁₆ in

Weight (approx.)

390g; 13.8oz (w/ant. and BP-222N)

Transmitter
Output power (at 7.2V DC) IC-V82 IC-U82	7.0/4.0/0.5W (High/mid/low) 5.0/2.0/0.5W (High/mid/low)
Spurious emissions	Less than -60dBc
Max. freq. deviation	�5.0/�2.5kHz (Wide/narrow)
External Microphone connector	3-conductor 2.5(d)mm (¹/₁₀") / 2.2kΩ

Receiver
Receive system	Double conversion superheterodyne
Intermediate freq.	46.35MHz/450kHz (1st/2nd)
Sensitivity (typical)	0.16�V (typ.; at 12dB SINAD)
Squelch sensitivity	0.11�V (typ.; threshold)
Selectivity	More than 55/50dB (wide/narrow)
Intermodulation	65dB (typ.)
Spurious and image rejection	80dB (typ.; VHF) 70dB (typ.; UHF)
Audio output power	300mW with an 8Ω load
Ext. speaker connector	3-connector 3.5(d) mm (¹/₈�) / 8Ω
Ext. Data connector	3-connector 2.5(d) mm (¹/₁₀�)